产品列表
- 按钮开关
- 按键开关
- 耳机插座
- 自锁开关
- 拨动开关
- 轻触开关
- DC电源插座
- 检测开关
- 滑动开关
- 推动开关
- USB插座
- 震动开关-滚珠开关
- 门锁开关-门扣开关
- 五项开关/拨轮开关
- 直键开关
- 摇杆拨动开关
- 船型开关
- 翘板开关
- 微动开关
- 三向开关
- 五向开关
- 按钮手电筒开关
- DIP Switch|拨码开关
- 摇杆拨动开关
- 叶片式开关
- 手机电池连接器
- 顶针连接器
- 刀片电池连接器
- RJ45网络插座
- FPC连接器
- Wafer针座连接器
- 板对板BTB连接器
- 纽扣电池座
- 机械键盘开关
- 汽车电器开关
- AC插座/AC电源插座
- DC插头及AV插座
- 钮子开关|摇臂开关
- PTB外接线插座
- 电源开关
- 门灯开关
- 电池盒
- 电池弹簧片
- 开关帽
- 新品
- 线对板连接器
- 接口连接器
- 接线端子
- 手电筒开关
产品名称:笔记本电池座连接器
品牌:利铭科技
刀片电池座技术参数
接触电阻:30mΩ Max
额定电流:3A 5A 7A /PIN
瞬间电流:7A - 10A
额定电压:125V AC/Min
绝缘电阻:100MΩ Min
工作温度:-30℃~105℃
耐 电 压:500V
耐 高 温:260℃/5S
盐雾试验:48小时
刀片电池座PIN位:2P-12P
绝缘主体:Nylon 6T / 9T(UL94V-0)
接触点五金材质:黄铜 镀金 C5191
表面镀层:金在镍/锡之上,镀层厚度3U″
笔记本刀片电池连接器-产品分类:公座和母座
1.公座分为:带柱和无柱/2.0间距和2.5间距
2.母座分为:2.0间距和2.5间距/带柱和无柱
3.母座分为:5.0间距和5.0间距/带柱和无柱
焊脚:常规焊脚、或加长焊脚
镀金:"2U""3U",量大可加持镀金"5U""7U""10U".20U"..
针数:2PIN、3PIN 4PIN 5PIN 6PIN 7PIN 8PIN 9PIN 10PIN、11PIN、12PIN....
颜色:黑色、白色...(常规黑色,量大可定做颜色)
材料组成:铜镀金"2U"、Nylon 9T(UL94V-0)\LCP
测试结果:
可靠性插拔力测试规格:lnsertion force : 0.08
1.50KG Max :Extraction force 0.15-1.2KG Max .
测试:公母匹配插拔力符合设计要求。
可靠性接触阻抗测试规格:Ri≤20mΩ
测试:在不破坏端子表面的氣化薄膜下,测试结合两端子间接触阻值,以作为连接器端子信号传输稳定性评估
刀片电池座产品用途:一般应用到笔记本电脑,笔记本电池,充电器,医疗器械,玩具模型,无人机,汽车导航仪等等众多行业
Product name: laptop battery holder connector
Brand: Liming Technology
Technical Parameters of Blade Battery Holder
Contact resistance: 30mΩ Max
Rated current: 3A 5A 7A /PIN
Instantaneous current: 7A-10A
Rated voltage: 125V AC/Min
Insulation resistance: 100MΩ Min
Working temperature: -30℃~105℃
Withstand voltage: 500V
High temperature resistance: 260℃/5S
Salt spray test: 48 hours
Blade battery holder PIN: 2P-12P
Insulation main body: Nylon 6T / 9T (UL94V-0)
Contact point hardware material: brass gold-plated C5191
Surface coating: gold on top of nickel/tin, the thickness of the coating is 3U″
Notebook Blade Battery Connector-Product Category: Male and Female
1. The male seat is divided into: with column and without column/2.0 pitch and 2.5 pitch
2. The female seat is divided into: 2.0 pitch and 2.5 pitch / with column and without column
3. The female seat is divided into: 5.0 pitch and 5.0 pitch / with column and without column
Welding foot: conventional welding foot, or extended welding foot
Gold-plated: "2U" "3U", large quantities can be blessed with gold-plated "5U", "7U", "10U".20U"..
Number of pins: 2PIN, 3PIN 4PIN 5PIN 6PIN 7PIN 8PIN 9PIN 10PIN, 11PIN, 12PIN...
Color: black, white... (regular black, color can be customized for large quantities)
Material composition: copper gold-plated "2U", Nylon 9T (UL94V-0)\LCP
Test Results:
Reliability plug force test specification: lnsertion force: 0.08
1.50KG Max: Extraction force 0.15-1.2KG Max.
Test: The mating force of male and female matches the design requirements.
Reliability contact impedance test specification: Ri≤20mΩ
Test: Test the contact resistance between the two terminals without damaging the vaporized film on the surface of the terminal to evaluate the signal transmission stability of the connector terminal
To
Blade battery holder product use: generally used in notebook computers, notebook batteries, chargers, medical equipment, toy models, drones, car navigators, and many other industries
关闭窗口 打印本页 |
上一产品: |